|
Installation (2)
Panel can be cut as required by fretsaw and handsaw, for instance, it is better to choose a steel to saw with fine tooth when cutting as arc.
It can be fixed directly by auto-drilled bolt but it would be more reliable to employ the qualified HIGOAL double-layer water resistant rubber washer.
After the installation, please wash it by neutral soap water or scour with soft cloth, do not use rough brush or mop to prevent any damage.
HIGOAL recommends two installations:
1、 Extend the skylight panel from ridge to eave
2、 Covers the skylight panel from ridge to the dle of roof surface
Standard connection between ends of skylight panel
If it is necessary to apply another way when installing, please contact our engineering department, they will serve you with more suggestions and content reply.
Vault lighting
These two examples are the skylight panel applied in roof vault lighting and walkway vault lighting. What should be mentioned when designing is that excess banding will produce an interior force and will shorten the usage life
Take HIGOAL #830 skylight panel as an example, we provide below design points for your reference:
Max curvature: 
Transportation & storage of skylight panel
 If moving multi-pieces together, please use the suspending tools as right picture shown. When transporting a few skylight panel separately, please do not bend or distort the panel to avoid any damage.
Please block up the skylight panel by wood when storing to prevent dipping in rain and insolation. Besides, please keep it far away from organic solvent.
|
